Rigs can be used in a variety of fishing situations across many different types of water. In this comprehensive guide, you will learn about the different types of rigs and how to set them up for the best results. You will also learn about rigging techniques for a variety of fish and scenarios.

What is a Texas Rig?

A Texas Rig is a rigging system used in fishing that consists of two lines, one attached to the boat and the other to a weight or anchor. The Texas Rig is used to keep a bait stationary in the water while you reel it in. It’s also used to set and retrieve jigs, poles, and hooks from the water.

Texas Rig Basics

If you’re looking to rig a Texas rig, there are a few basics you need to know. First, the rig consists of a main line, a couple of sublines, and a dropper. The main line is the longest line and it runs from the bottom of the rod to the top of the bait. The sublines are shorter lines that run parallel to the main line. The dropper is a small line attached to the end of the main line that is used to drop baits down into the water.

To rig a Texas rig, start by tying a simple overhand knot in the main line. Then, tie an overhand knot in each of the sublines. Finally, tie a loop in the dropper and slip it over the top of the main line.

Types of Rigs

The rigging of a Texas rig is a complex and unique process. There are many types of rigs, each with its own set of rigging techniques. This article will cover the most common rigging techniques used in Texas Rigging.

Types of Rigs: The Standard Rig

The standard rig is the most common type of rig used in Texas rigging. It is made up of three main components: the jib, the mainsail, and the spinnaker. The jib is a small, lightweight sail that is mounted on the mast above the deck. The mainsail is a larger, more powerful sail that hangs from the mast below the jib. The spinnaker is a large, triangular sail that hangs from the bow of the boat.

Rigging Techniques for the Standard Rig: Jibing

To jibe, you first need to determine how much wind there is (and how strong it is), then adjust your sails accordingly. To jibe your mainsail, first tie it off to your moorings or cleats on either side of your boat.

How to Rig a Texas Rig?

A Texas rig is a popular rigging technique used to haul large loads in open water. It consists of a mast, boom, and sails. The mast is the tallest object on the rig and can be up to 30 feet tall. The boom is the long, thin arm that extends from the mast. The sails are attached to the boom and are used to move the boat forward or backward.

How to Make a Decision on When to Rig a Texas Rig?

There is no one answer to this question. It depends on the conditions of the fishery, the type of catch you are trying to make, and your own personal preferences.

Some factors to consider include:

  • The type of fishing gear you are using.
  • The size of the fish you are targeting.
  • The weather conditions.
  • The currents in the area.
  • How strong the current is.
  • How deep you are fishing.
  • What type of bottom material is present.

When to Pull the Trigger on a Rig?

There’s no one definitive answer to this question, as the decision to rig or not rig a particular fish will vary depending on a number of factors specific to that fishing spot and the type of fish being targeted. However, here are five general guidelines to help you make informed decisions when it comes to rigging:

  1. Always consult the local fishing regulations before rigging’ up. Many states have limits on how much weight a particular piece of tackle can carry, so be sure to stay within those boundaries.
  2. Use the right gear for the job. A heavy-duty rig is often necessary when targeting big fish in deep water, while a light setup may be sufficient for smaller fish near the surface.
  3. Think about your line length. A too-long line can be tiring to fight with, while a too-short line can easily break under pressure. Experiment with different lengths until you find something that feels comfortable and allows you to land your catch quickly.
  4. Pay attention to wind conditions. Strong winds can cause your line to twist and kink, making it difficult to land your fish. Keep an eye on the direction of the wind.

Texas Rigging: Get in touch

Texans are some of the most well-trained riggers in the country, and this is reflected in the state’s thriving industry. In this guide, we will cover rigging basics, from setting up the jib to tuning up the mast. We will also discuss how to rig a trawl net, how to troubleshoot rigging issues, and how to mount cameras and other equipment on a boat. Whether you are a recreational fisherman or a commercial fisherman working in big water, learning how to rig your boat properly is essential for safety and efficiency.


The Texas Rig is one of the most popular rigs in use today. It is a versatile rigging system that can be used for a variety of applications. This rig is made up of several different pieces that work together to create the perfect setup for your fishing trip. In this blog, we will discuss the different components of this rig and how to use them. We will also show you some popular techniques for using this rig to catch fish.


Is There One Rod That Can Rule All?

There is no one answer to this question since the best bass fishing rod for you will depend on your specific needs and preferences. However, here are some general tips that can help you choose the right Bass Fishing Rod for you:

  • First, consider your budget. Do you want a top-of-the-line rod that will set you back a few hundred dollars or do you want a more affordable option that won’t break the bank?
  • Next, think about what type of fishing you plan to do. If you’re targeting largemouth and smallmouth bass in freshwater or saltwater, respectively, your requirements will be different.
  • Finally, take into account what type of terrain you’ll be fishing in. A rod designed for casting in still water may not be the best choice if you’re targeting big fish in rocky areas.


In Texas, you’re never too far from a good fishing spot. And because of the vastness of the state, there are plenty of different ways to rig your line and put your bait on the hook. Whether you’re targeting largemouth or smallmouth bass, here’s a guide to rigging for both:

Largemouth Bass: When fishing for largemouth bass in open water, use a 6-foot leader with a 1/4-ounce jig head and a 20-pound test line. Make sure to use a swivel when casting to avoid tangling. To get the most out of your lure, try suspending it over Structure such as docks or bridge pilings.

Smallmouth Bass: For smallmouth bass in open water, use a 7-foot leader with a 1/2-ounce jig head and 25-pound test line. To get more action out of your lure, suspend it below Structure such as docks or bridge pilings. When fishing around cover such as trees or brush, try using an attractor (such as a chunk of bait) tied directly to the jighead.


The Daiwa Tatula CT Type-R is another great option

The Daiwa Tatula CT Type-R is a great option for anglers looking for an efficient spinning reel. The reel is available in both a 3.0 and 4.5:1 gear ratios, making it suitable for a variety of fishing conditions. The CT Type-R features Daiwa’s acclaimed Drag Reduction System, which reduces drag and helps the reel perform better. This reel also comes with Daiwa’s SICSCAL technology, which ensures smooth and consistent casting.


The Texas rig is a popular rigging configuration used in both freshwater and saltwater fishing. This rigging configuration is a great option for anglers who want to keep their gear down while catching big fish. The Texas rig also makes it easy to change flies quickly and efficiently.

To set up the Texas rig, you’ll need a leader, an intermediate line, a fly line, and a weight. The leader is typically about 18 inches long and made of braided material. The intermediate line is simply the main line with a heavier weight at the end to help sink the fly more quickly. The fly line is typically 10 or 12 feet long and used to attach the fly to the hook. Finally, the weight can be anything from a small stone to a full-sized crab or minnow.

To use the Texas rig, tie your leaders close to your fly line like normal. Then, tie your intermediate line directly to your fly line about 6 inches below the main line. Finally, tie on your weight as desired. When casting with this rig, make sure to keep your arms extended fully so that the lines are taut when released.



Hooks are a critical part of any rigging job. In this post, we’ll cover the basics of hooks and discuss the different types you may encounter. We’ll also outline some rigging techniques that use hooks. Ready to get started? Let’s get rigging!

What is a Hook?

A hook is a type of tool used to fasten objects together. They come in a variety of shapes and sizes, and can be made from metal, plastic, or even wood. Hooks can be used for a variety of purposes, including attaching lines to objects, holding objects in place, and suspending objects.

Types of Hooks

There are several different types of hooks available, each with its own specific uses. We’ll cover the most common types below.

Hook Point: A pointy hook that’s usually used for attaching lines to objects. Pointy hooks are often called “dowels,” “spikes,” or “needles.”

Bent-Shaft Hook: A bent-shaft hook is similar to a pointy.


Hook Sizing

There are a few things you need to consider when sizing your hook for a particular fish. The first is the size of the fish. Secondly, the type of fishing you will be doing.

If you are targeting larger fish, like catfish or largemouth bass, you will want to use a bigger hook. Similarly, if you are fishing for smaller fish like trout or panfish, you can use a smaller hook.

The next thing to consider is the type of fishing gear you will be using. A fishing rod with a large reel can take a larger hook than a fishing rod with a small reel. Likewise, a baitcaster rod can take a smaller hook than a spinning rod.

And finally, the type of fish you are targeting. Larger fish tend to eat bigger hooks, while smaller fish prefer smaller hooks. So, it is important to research the size of the fish you are targeting before purchasing your hook size.


Soft Plastics

When it comes to rigging, there are a few key techniques that are essential for any fisherman. The first is setting the hook. The second is casting. And finally, rigging can make or break your fishing trip.

In this article, we will discuss rigging in detail, from the basics of line handling to more advanced setups. We’ll also cover some soft plastics techniques that can help you catch more fish. So get ready to learn all about rigging and Texas rigs!

Strike King Rage Tail Craw

Strike King Rage Tail Craw is a new way to rig a baitfish rig. This rig has a unique design that allows you to pull the bait further out into the water column, creating more distance between the angler and the fish. This rig is perfect for fishing in tight spaces or for targeting shy fish.

Strike King Rage Craw/Falcon Lake Craw, Multicolor, 4-Inch (RGCRW-135)


Culprit Original Worms

When it comes to rigging and techniques, the Texas rig is king. Developed in the oil fields of Texas, this rig is versatile and efficient. In this article, we will cover the basics of the Texas rig, as well as some of its more common uses.

The Texas rig consists of a number of interconnected pieces that allow you to manipulate your fishing line and baits in ways that are not possible with other rigs. Some common features of the Texas rig include a depth finder, a swivel gun, and a dropper. The depth finder allows you to set the hook at a specific depth, while the swivel gun enables you to change your bait location quickly and easily. The dropper allows you to add or remove weight from your line without having to re-tie knots.

The Texas rig is versatile and efficient, making it an ideal choice for both freshwater and saltwater fishing. If you are unclear on how to use a particular type of rig, don’t worry – our team at Store Your Catch can help you get started in no time.

Culprit C720-48 Original Worm, 7-1/2-Inch, June Bug, 18-Pack


Zoom Magnum II Worm

The Zoom Magnum II worm is a modern rigging system that offers a number of benefits over traditional methods. It’s lightweight and easy to set up, making it a great choice for photographers and videographers who need to move quickly and capture high-quality footage. Here’s a complete guide to using the Zoom Magnum II worm in your photography or video workflow.

Zoom Magnum II Worm-Pack of 20 (Black, 9-Inch)


Zoom Bait Brush Hog

Zoom Bait Brush Hog is the perfect tool for targeting largemouth and smallmouth bass in brushy or overgrown areas. This baitcaster is designed with a large, soft-bristled brush hog impeller that creates big waves and wakes in the water, drawing in fish. The baitcaster features a twist knob to adjust the height of the “hog’s head”, so you can target any depth. The baitcaster also includes a 7-inch long cable for fast, easy operation.

Zoom Bait Brush Hog Bait-Pack of 8 (Watermelon Red, 6-Inch)


Yamamoto Fat Ika

When it comes to fishing in Texas, there’s no ignoring the power of Yamamoto Fat Ika rigs. This versatile rig can be used for a wide variety of gamefish, from large mouth bass to striper trout. Here’s everything you need to know about rigging and using this popular rig in Texas waters.

Yamamoto Gary Custom Baits 4' Fat Ika (297 NF/LG GRN PURP 92F-10-301)


Zoom Bait Magnum Lizard

The Texas rig is a popular fishing rig used to catch largemouth and spotted bass. It consists of a 1/2-inch jig with a 4-inch lure attached to a 10-foot leader. The jig is slowly dragged across the bottom while the lure is slowly pulled towards the boat.

Zoom Bait Magnum Lizard Fishing Bait, Green Pumpkin Magic, 8'


Bullet Weights

There are a few things to consider when rigging a Texas rig. First and foremost, the weight of the bait should be considered. Second, the type of bait you will be using should be considered. Third, the type of fishing you are doing should also be considered. Finally, the technique you will be using should be chosen.

50Pcs Fishing Sinkers Weights Kit Worm Fishing Sinker Weight Bullet Lead Sinkers Fishing Set


How to Assemble Texas Rigs?

In this blog, we will show you how to assemble a Texas rig. A Texas rig is a versatile tool that can be used for a variety of fishing applications. It consists of a baitcaster or reel with a large spool, a rod with a medium-heavy action, and tackle that includes a size 6 or 8 hook and appropriate line. The most important part of the Texas rig is the knot that ties it all together: the Bimini hitch.

Steps will help you assemble a Texas Rig

The Texas rig is a versatile and efficient rigging system that can be used for a variety of applications. This rig is perfect for working in tight spaces or on high-angle shots. There are a number of steps that you will need to follow in order to assemble your Texas rig.

  1. Choose the right rigging gear. The Texas rig is made up of a series of different pieces of rigging gear, each with its own specific function. Make sure to choose the right items for the job at hand.
  2. Choose the right anchors. Anchors are essential for stability and safety when rigging up a Texas rig. Make sure to choose anchors that are strong enough to support your gear, but also lightweight so that you can move them easily.
  3. Construct the frame. The frame of the Texas rig is the basic structure from which you will hang your gear. It is important to select an sturdy frame that can support your weight and withstand wear and tear. The frame can be made from a variety of materials, including metal or plastic tubing.
  4. Hang your gear. Once you have constructed your frame, it is time to hang your gear!

The Great Debate: To Peg or Not to Peg

For those unfamiliar with the term, “pegging” is a rigging technique used to keep a sailboat pointing in a specific direction. The word comes from the days when sailors would peg a rope to a post on the deck of their ship, and use it to steer.

Today, there are two main types of pegging systems used in sailing: lead and drogue. Lead pegging is the most traditional method and uses a lead line or weight attached to the end of a tether attached to the mast. When the sail is raised, the wind pulls on the lead line, which in turn pulls on the tether and causes the mast to stay put. Drogue pegging uses a weight or anchor connected to a long chain that runs through a ring at the bottom of the sail. When the sail is raised, air pressure inside the sail creates a drag on the chain, which in turn pulls on the ring and keeps the mast still.

Which system should you use? That’s a great question! There are pros and cons to both systems, so it really depends on what you’re looking for in a rigging system. If you want simplicity and minimal setup time, lead pegging.

How to Fish a Texas Rig?

If you’re looking to take your fishing game to the next level, a Texas rig is definitely the way to go. This popular rig is made up of a number of different techniques that can be used to catch some big fish. Here’s everything you need to know about rigging and using techniques with a Texas rig:

The Fall is a great time to work

The Texas rig is a great way to work during the fall. The colors are beautiful, and the weather is perfect. There are many different rigs available, so there is something for everyone.

The Slow Drag

If you’re in the market for a new rig, you’ve come to the right place. In this article, we’ll take a look at the Texas rig, and explain its benefits. First and foremost, the Texas rig is versatile. It can be used for a wide range of fishing situations, both big and small. Additionally, it’s one of the most efficient rigs out there. This means that you’ll be able to catch more fish with it than with any other rig. If these factors sound good to you, read on!

To set up your Texas rig, you’ll need three main pieces: your rod, reel, and line. The first two are pretty straightforward: Choose a rod that’s strong enough to handle the fish you’re targeting and a reel that can handle the weight of your line. The third piece is a bit more complicated. You’ll need to choose an appropriate line type for the type of fishing you’re planning on doing. For instance, if you’re targeting smaller fish on shallow water jigs, use a lighter line than if you’re chasing larger fish on heavy lures deep in the shoreline brush. Here are some more tips for setting up your Texas rig

Lose Weight

If you’re looking to lose weight, you need to start by making some changes to your diet and exercise routine. But what if you’re not sure how to get started? You can look into one of the many weight-loss programs out there, but that can be a lot of work. Alternatively, you could try using a rig to help you lose weight.

There are many different types of rigs available on the market, so it’s important to choose the right one for your needs. If you’re new to rigging, read our complete guide first to get started. Once you know the basics, you can experiment with different techniques and find something that works best for you.

If weight loss is your goal, using a rig is a great way to get there. Just be aware that it may take some time before you see results, so don’t be discouraged if things don’t happen overnight. In the meantime, use our guide to help make your rigging experience as successful as possible.


As a fisherman, you know that the successful pursuit of your quarry often comes down to good rigging and excellent technique. In this comprehensive guide, we will cover everything you need to know about rigging for Texas fishing, from choosing the right gear to mastering the art of casting. Whether you are a beginner or an experienced angler, I believe that this guide will provide you with everything you need to take your hunting and fishing skills to the next level. Thanks for reading!


Leave a Reply

Your email address will not be published. Required fields are marked *