If you’re like me, you love spending time outdoors fishing. But the process of reeling in a big fish can be strenuous and tiring, especially if you’re using a standard reel. If you’re looking to up your game in the sport, or just want to make the process a little easier on yourself, here’s how to respool a fishing reel!

What is respooling a fishing reel?

respooling means to refill a fishing reel with new line. When the line on a fishing reel gets worn, it can no longer be effectively caught by the fish. The best way to fix this is to replace the line with fresh line – usually done by rewinding the reel and pulling the old line out.

How to respool a fishing reel?

If your fishing reel’s drag has become loose, you can respool it by following these steps: First, remove the line from the reel by pulling it out of the spool. Next, hold the reel so the gear wheel is facing down and unscrew the bottom cap. Remove the inner spool and insert a new one. Replace the bottom cap and screw it in place. Finally, reattach the line to the reel by threading it through the gear wheel and up through the hole in the bottom cap.

When should you respool a fishing reel?

When you start to notice a significant decrease in line strength or when your reel starts skipping, it is time to respool your reel. This means replacing the line that is currently on the reel with a new one.

What are the benefits of respooling a fishing reel?

One of the benefits of respooling a fishing reel is that it restores its tension. This can help to improve your chances of catching a fish. Additionally, respooling a reel can also fix any problems that may have occurred with it, such as broken gears.

How to respool a fishing reel: The steps

If you’re fishing with a reel that’s been sitting unused for a while, it’s time to respool it. Here’s how:

  1. Remove the old line from the reel. You may need to use a tool to unscrew the reel’s handle if it’s attached by screws.
  2. Remove any corrosion or built-up on the spool and reels’ bearings with an alcohol swab or a toothbrush.
  3. Fit new line onto the spool and place it onto the bearings. Make sure the line is aligned straight down the middle of the spool. If your reel has a braided line, be sure to cut off any excess before fitting it on the reel.
  4. Screw the reel’s handle back on and test it out by spinning the wheel. The new line should be pulled smoothly through the spool. If not, adjust the line tension using your fingers or a screwdriver.